Description
Guard high – flow curb inlets from silt, sediment, and other contaminants
The Ultra-Gutter Guard Plus is designed for curb inlets with high-flow volumes. Its unique, multi-dimensional outer filter combined with a rigid inner frame and support counterweight prevents debris and silt from clogging inlets while keeping the unit upright and secure.
Key Features:
- Modular, 3-foot, inner frames allow for compact transport and storage.
- Counterweight inserts into the inlet to keep unit upright and secure. An optional 7 lb. weight available is available – rebar, gravel or other material can also be used.
- Tie-back straps on either end of the unit can be used with sod pin or stake for additional anchoring.
- Can be easily cleaned and reused.
- Sizing note:When ordering allow 12″ overlap on each side of curb inlet.
Compliance:
- Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
Ultra-Gutter Guard Plus
| Part # | Description | Dimensions in. (mm) | Weight lbs. (kg) |
|---|---|---|---|
| 9151 | Gutter Guard Plus | 6′ L x 6″ H (1,829 x 152) | 10.0 (4.5) |
| 9158 | Gutter Guard Plus | 9′ L x 6″ H (2,742 x 152) | 13.0 (6.0) |
| 9154 | Gutter Guard Plus | 12′ L x 6″ H (3,658 x 152) | 16.0 (7.0) |
| 9159 | Gutter Guard Plus | 15′ L x 6″ H (4,572 x 152) | 20.0 (9.0) |
Options
| Part # | Description | Dimensions in. (mm) | Weight lbs. (kg) |
|---|---|---|---|
| 9148 | Counterweight (*One weight required for Part# 9151. Two required for all other sizes.) | 14″ L x 1½” dia. (356 x 38) | 7.0 (3.0) |
Reviews
There are no reviews yet.