Description

Brazier Head Drive Pin Rivets

Drive pin rivets can join two or more pieces of low-density metal without the use of special installation tools. The rivet is inserted into pre-drilled, aligned holes and is set in place by striking the top of the pin with a hammer so that the pin is flush with the top of the head. This action causes the pin to drive through the opposite end and flare out in four directions creating a head on the blind side of the fastening. Drive pins have superior shear strength to standard break stem rivets because the pin remains inside of the installed rivet for its entire length. The brazier head variety offers a greater bearing surface area than the universal head. The rivets with a grip range of an inch or greater may be used for fastening into masonry.

Material

Body: Aluminum alloy 2117 H15 or equivalent alloy

Pin (1/8 diameter): 302 series Stainless Steel

Pin (3/16 1/4” diameters): Aluminum alloy 2024 T4 or equivalent alloy

Shear Strength (approximate)

3/16″ diameter: 650 lbs. minimum; 1/4″ diameter: 1150 lbs. minimum

Tensile Strength (approximate)

3/16″ diameter: 460 lbs. minimum; 1/4″ diameter: 82

General

Product Type:Drive Pin Rivet

UOM:BX

Unit Size:1000

Pieces Per Unit:1000/BX

Weight:8.280000

MPN:141000ABA