Description

Guardian G1902 Eye Wash/Shower Safety Station

---

Application: Combination eyewash and shower safety station. Two GS-Plusâ„¢ spray-type outlet heads deliver a flood of water for rinsing eyes.

---

Shower Head: 10″ diameter orange ABS plastic.

---

Shower Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.

---

Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water.

---

Eyewash Bowl: 11-1/2″ stainless steel.

---

Eyewash Valve:1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

---

Pipe Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.

---

Supply: 1-1/4″ NPT female top or side inlet.

---

Waste: 1-1/4″ NPT female outlet. Outlet can be positioned at either 9-1/4″ or 19-5/8″ above finished floor by reversing lower pipe nipples.

---

Sign: Furnished with ANSI-compliant identification sign.

---

Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.

---

Available Option

• GC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
• FC20 Regulates shower flow rate to 20 GPM.
• GRN Green ABS plastic shower head.
• YEL Yellow ABS plastic shower head.
• SSH Stainless steel shower head.
• AP275-100 ELECTRIC LIGHT AND ALARM HORN Light and alarm horn summon assistance when eye/face wash or shower is activated.
• AP250-015 MODESTY CURTAIN Modesty curtain for mounting on safety station.
• TMV G3800LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2014.